English
Русский
Español
Français
Deutsch
Description
6 Amp RCBO is a leakage protection circuit breaker suitable for a rated voltage of 240V and a rated current of 6Amp, providing safety for the operator.
6 Amp RCBO Special Tips
1. RCBO with rated sensitivity up to 100mA could be used as a supplementary protecting device in case other protecting device fails its protection against electric shock.
2. RCBO is specially designed for home installation and other similar applications, non-professional operation, and no maintenance.
3. RCBO cannot prevent electric shock caused by direct contact between two protected circuits or leakage current between the two circuits.
4. The RCBO overcurrent protection value is fixed and no further adjustments are made.
5. It is recommended to install special equipment such as surge protectors and lightning arresters on the upstream line of the RCBO to prevent potential surge voltage and current from appearing on the power input side.
5. To meet the above conditions and applications, RCCB with an “ON-OFF” indicates the device is considered suitable for isolation function.
| Model Name | TOB01-32 |
| Model | Electronic type |
| Residual Current characteristic: | AC |
| Pole No: | 1P+N |
| Tripping Curve | C |
| Rated current（A） | 6 |
| Rated voltage | 240V/ |
| Rated frequency | 50/60Hz |
| Rated residual operating current |△(A): | 0.03 |
| Rated residual non operating current |△ no: | 0.5|△ n |
| Rated conditional short-circuit current inc: | 3kA |
| Rated conditional residual short-circuit current |△c: | 3kA |
| Tripping duration: | Instantaneous tripping ≤0.1s |
| Residual tripping current range: | 0.5||△n~|△n |
| Electro-mechanical endurance | ≥4000 cycles |
| Connection capacity: | RIGID CONDUCTOR 16MM² |
| Connection terminal | Screw terminal Pillar terminal with clamp |
| Fastening torque | 2.0 Nm |
| Installation | On symmetrical DIN rail 35mm Panel mounting |
